Support
Log In

Tank build introduction

Fabricating a custom gas tank

Current Progress

Step 1

STEP 2

STEP 3

0% Not started

Instructor

Matt McLeod

Fabricating the tank base

FInishing the shell to base seam

Prepare to weld the base to shell

Finishing the base to shell weld joint

Mark lesson complete

Social media

__CONFIG_colors_palette__{"active_palette":0,"config":{"colors":{"f3080":{"name":"Main Accent","parent":-1},"f2bba":{"name":"Main Light 10","parent":"f3080"},"trewq":{"name":"Main Light 30","parent":"f3080"},"poiuy":{"name":"Main Light 80","parent":"f3080"},"f83d7":{"name":"Main Light 80","parent":"f3080"},"frty6":{"name":"Main Light 45","parent":"f3080"},"flktr":{"name":"Main Light 80","parent":"f3080"}},"gradients":[]},"palettes":[{"name":"Default","value":{"colors":{"f3080":{"val":"rgb(23, 23, 22)"},"f2bba":{"val":"rgba(41, 49, 38, 0.5)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}},"trewq":{"val":"rgba(41, 49, 38, 0.7)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}},"poiuy":{"val":"rgba(41, 49, 38, 0.35)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}},"f83d7":{"val":"rgba(41, 49, 38, 0.4)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}},"frty6":{"val":"rgba(41, 49, 38, 0.2)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}},"flktr":{"val":"rgba(41, 49, 38, 0.8)","hsl_parent_dependency":{"h":101,"l":0.17,"s":0.12}}},"gradients":[]},"original":{"colors":{"f3080":{"val":"rgb(23, 23, 22)","hsl":{"h":60,"s":0.02,"l":0.09}},"f2bba":{"val":"rgba(23, 23, 22, 0.5)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.5}},"trewq":{"val":"rgba(23, 23, 22, 0.7)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.7}},"poiuy":{"val":"rgba(23, 23, 22, 0.35)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.35}},"f83d7":{"val":"rgba(23, 23, 22, 0.4)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.4}},"frty6":{"val":"rgba(23, 23, 22, 0.2)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.2}},"flktr":{"val":"rgba(23, 23, 22, 0.8)","hsl_parent_dependency":{"h":60,"s":0.02,"l":0.09,"a":0.8}}},"gradients":[]}}]}__CONFIG_colors_palette__

About

__CONFIG_colors_palette__{"active_palette":0,"config":{"colors":{"df70c":{"name":"Main Accent","parent":-1}},"gradients":[]},"palettes":[{"name":"Default","value":{"colors":{"df70c":{"val":"var(--tcb-skin-color-28)","hsl":{"h":53,"s":0.4194,"l":0.8176,"a":1}}},"gradients":[]},"original":{"colors":{"df70c":{"val":"rgb(55, 179, 233)","hsl":{"h":198,"s":0.8,"l":0.56,"a":1}}},"gradients":[]}}]}__CONFIG_colors_palette__

Privacy Policy
About
Contact

Session expired

Please log in again. The login page will open in a new tab. After logging in you can close it and return to this page.

Tank build introduction

Introduction

Tank design

Building a metalshaping buck

Making the tank sides & top

Welding & finishing the seam

Fabricating the tank base

FInishing the shell to base seam

Social media

About